Our proven thermal film BSF (iron-on embroidery film) "FusyFilm"
Thermal Foil to make patches ironable on textiles
Mounting with electric iron or hot press to the back of embroidered badges.
The durability according to the manufacturer is up to 90 degrees.
Price per running metre, width: 49cm.
Processing instructions:
1. embroider patches, preferably on embroidery backing material SUMa or SUMa-Soft
2. take the patch out of the embroidery frame, turn it over so that the back looks upwards.
3. press on the thermal foil with the protective paper facing upwards (so that it does not stick to the iron) at approx. 175 degrees Celsius with an iron or transfer press for approx. 3 seconds
4. peel off protective paper.
5. apply a second layer of thermal foil (see point 3); the first layer is well absorbed by the embroidery base, the second layer then adheres excellently to the textile.
6. peel off the protective paper.
7. cut out the patch with scissors.
8. iron on the patch with an iron or ironing press from the front for approx. 3 seconds at the desired position.
9. turn the textile onto the back and press it from the back for approx. 15 - 20 seconds at approx. 175 degrees (
ATTENTION: The contact pressure must only be very low, otherwise the patch will absorb the adhesive layer and will not adhere to the textile). This way the adhesive melts into the textile and holds perfectly.
Roll material 100 m x 49 cm. Apply to the back of embroidered badges by ironing, hot pressing or ironing. Durability according to manufacturer's specifications up to 90 degrees.
