Mighty Hoops Accessoires

Variable fixture for Mighty HoopThe variable fixture is suitable for all Mighty Hoop frames in the following sizes: 7,25x7,25" (184x184mm)10x10" (245x245mm)8x13" (194x325mm)11x13" (275x325mm)12x15" (300x375mm)13x16" (325x400mm)The lower mounting rail is attached to the HoopMaster Station. The upper mounting rail can be easily adjusted in height and is therefore suitable for the various frames (see above). The magnetic flaps hold the fleece in place when clamping. To be able to use the Mighty Hoop frames effectively, we recommend the HoopMaster starter pack with the article number HM-Start.

MightyHoop - Variable fixture for sleeve frame (4.25x13")Together with the MightyHoop sleeve frame, the new MightyHoop variable sleeve holder makes hooping sleeves, trouser legs and tubular fabric much easier. The fabric to be embroidered is simply slipped over the sleeve holder and clamped with the MightyHoop sleeve frame, which is available to match exactly. This makes straight and firm fastening much more convenient. The holder can be variably adjusted so that smaller frames can also be used. To be able to use the Mighty Hoop frames effectively, we recommend the HoopMaster starter pack with the article number HM-Start.

MightyHoop Hoopmaster Basic stationThe HoopMaster for professional hooping of textiles for embroidery.  The HoopMaster basic station can be individually upgraded for breast and back embroidery. Perfectly customised embroidery hoops allow textiles to be hooped easily and accurately.

MightyHoop sleeve frame stationThe MightyHoop sleeve frame station, together with the MightyHoop sleeve frame and the MightyHoop sleeve holder, offers the perfect solution for clamping trouser legs, sleeves and other tubular fabric firmly and straight. You will be impressed. The sleeve frame station can also be used in a variety of other areas, e.g. in combination with the article HM-TWinkel and the freestyle board*. The MightyHoop sleeve frame can be found under item number HM-R108330. The MightyHoop sleeve holder can be found under item number HM-A330108.* The freestyle board is included in the scope of delivery of the following items:HM-StartHM-UpgradeHM-A135HM-A184

MightyHoop - Fixture for 165x165mm (6,5x6,5") framesThe Mighty Hoop freestyle board is also included in the scope of delivery.  To be able to use the Mighty Hoop frames effectively, we recommend the HoopMaster starter pack with the article number HM-Start and HoopMaster StarterPlus with the article number HM-Start-Plus.

Connecting arms for various embroidery machines for the Mighty Hoop frameThe picture shows the MightyHoop connections for Toyota and Tajima machines!Connections are available for the following machines:MelcoAmayaToyotaTajimaZSKBarudanHappySWFBrother PRYou can find more detailed information in the size chart. Connections for other embroidery machines are available on request. To be able to use the Mighty Hoop frames effectively, we recommend the HoopMaster starter pack with the article number HM-Start and HoopMaster StarterPlus with the article number HM-Start-Plus.We always require the following information so that we can supply the correct connections:for which frame the connections are usedfor which embroidery machinewhich overall width according to size table (frame incl. bracket)

MightyHoop - Fixture for 135x135mm (5,5x5,5") framesThe Mighty Hoop freestyle board is also included in the scope of delivery.  To be able to use the Mighty Hoop frames effectively, we recommend the HoopMaster starter pack with the article number HM-Start and HoopMaster StarterPlus with the article number HM-Start-Plus.

MightyHoop - Fixture for 103x103mm (4,25x4,25") framesThe Mighty Hoop freestyle board is also included in the scope of delivery.  To be able to use the Mighty Hoop frames effectively, we recommend the HoopMaster starter pack with the article number HM-Start and HoopMaster StarterPlus with the article number HM-Start-Plus.

MightyHoop - Fixture for 184x184mm (7,25x7,25") framesThe Mighty Hoop freestyle board is also included in the scope of delivery.  To be able to use the Mighty Hoop frames effectively, we recommend the HoopMaster starter pack with the article number HM-Start and HoopMaster StarterPlus with the article number HM-Start-Plus.

MightyHoop Starter Plus Supplement for back embroidery for Brother PRThis set contains:1x Mighty Hoop 8x13“ (194x325mm) frame. This is the largest possible embroidery hoop for Brother PR embroidery machinesBrackets for YOUR machineAdjustable variable fixture for frame sizes from 7,25x7,25" to 8x13"Please refer to the size table to find out whether this add-on set is suitable for your machine or whether there are suitable connection arms available.The Hoopmaster basic station can be found under the item number Hoopmaster-Grundstation.To be able to use the Mighty Hoop frames effectively, we recommend the HoopMaster starter pack with the article number HM-Start and HoopMaster StarterPlus with the article number HM-Start-Plus.ATTENTION! The frames contain strong magnets. Persons with pacemakers should consult their physician before use! Also avoid contact of the magnets with electrical devices, cell phones or credit cards. Before purchasing please also note the concerning safety data sheet

MightyHoop - T anglePositioning aid for embroidery for use in combination with the MightyHoop freestyle boardThe freestyle board is included with the following items: HM-StartHM-UpgradeHM-A135HM-A184For optimum use of the positioning aid, we recommend using it in combination with the MightyHoop sleeve station (article number HM-AermelStation).

MightyHoop Starter Plus Supplement for back embroidery   This set contains:1x Mighty Hoop 11x13“ (275x325mm) frameBrackets for YOUR machineAdjustable variable fixture for frame sizes from 7,25x7,25" to 13x16"Please refer to the size table to find out whether this add-on set is suitable for your machine or whether there are suitable connection arms available.The Hoopmaster basic station can be found under the item number Hoopmaster-Grundstation.To be able to use the Mighty Hoop frames effectively, we recommend the HoopMaster starter pack with the article number HM-Start and HoopMaster StarterPlus with the article number HM-Start-Plus.ATTENTION! The frames contain strong magnets. Persons with pacemakers should consult their physician before use! Also avoid contact of the magnets with electrical devices, cell phones or credit cards. Before purchasing please also note the concerning safety data sheet

MightyHoop - Upgrade   Expand your HoopMaster (Hoop Master) with the following accessories:Fixture for 5,5x5,5“ (135x135mm) Mighty Hoop frame2x Mighty Hoop 5,5x5,5“ (135x135mm) framesBrackets for YOUR machineFreestyle-Board 5,5“ for attaching to the sleeve frame stationPlease refer to the size table to find out whether this add-on set is suitable for your machine or whether there are suitable connection arms available.The Hoopmaster basic station can be found under the item number Hoopmaster-Grundstation. To be able to use the Mighty Hoop frames effectively, we recommend the HoopMaster starter pack with the article number HM-Start.ATTENTION! The frames contain strong magnets. Persons with pacemakers should consult their physician before use! Also avoid contact of the magnets with electrical devices, cell phones or credit cards. Before purchasing please also note the concerning safety data sheet

MightyHoop - Fixture for 160x210mm (6,25x8,25") framesThe Mighty Hoop freestyle board is also included in the scope of delivery.  To be able to use the Mighty Hoop frames effectively, we recommend the HoopMaster starter pack with the article number HM-Start and HoopMaster StarterPlus with the article number HM-Start-Plus.

Used Variable fixture for Mighty HoopThe variable fixture only minor signs of wear and is in perfect working order.The variable fixture is suitable for all Mighty Hoop frames in the following sizes: 7,25x7,25" (184x184mm)10x10" (245x245mm)8x13" (194x325mm)11x13" (275x325mm)12x15" (300x375mm)13x16" (325x400mm)The lower mounting rail is attached to the HoopMaster Station. The upper mounting rail can be easily adjusted in height and is therefore suitable for the various frames (see above). The magnetic flaps hold the fleece in place when clamping. To be able to use the Mighty Hoop frames effectively, we recommend the HoopMaster starter pack with the article number HM-Start.

Used MightyHoop - Variable fixture for sleeve frame (4.25x13")The variable fixture shows only minor signs of wear and is in perfect working order.Together with the MightyHoop sleeve frame, the new MightyHoop variable sleeve holder makes hooping sleeves, trouser legs and tubular fabric much easier. The fabric to be embroidered is simply slipped over the sleeve holder and clamped with the MightyHoop sleeve frame, which is available to match exactly. This makes straight and firm fastening much more convenient. The holder can be variably adjusted so that smaller frames can also be used. To be able to use the Mighty Hoop frames effectively, we recommend the HoopMaster starter pack with the article number HM-Start.

Used MightyHoop sleeve frame stationThe sleeve frame shows only minor signs of wear and is in perfect working order.The MightyHoop sleeve frame station, together with the MightyHoop sleeve frame and the MightyHoop sleeve holder, offers the perfect solution for clamping trouser legs, sleeves and other tubular fabric firmly and straight. You will be impressed. The sleeve frame station can also be used in a variety of other areas, e.g. in combination with the article HM-TWinkel and the freestyle board*. The MightyHoop sleeve frame can be found under item number HM-R108330. The MightyHoop sleeve holder can be found under item number HM-A330108.* The freestyle board is included in the scope of delivery of the following items:HM-StartHM-UpgradeHM-A135HM-A184