BobbinCase (holding device) in which the bobbin threads are inserted. Suitable for both self-wound bobbin threads and pre-wound bobbins. The bobbin thread tension can be adjusted individually with the adjusting screw. Highest quality "Made in Japan" Suitable for EmbriX, TOYOTA / EXPERT and RiCOMA embroidery machines.
Aluminium bobbin for self-winding of the lower thread. Reusable. Compatible for all TOYOTA/EXPERT and TAJIMA embroidery machines. z. B. ESP 9100, ESP 9000, AD 860, AD 850......
brass thumbscrew for all smaller, for example round free arm frames (70mm, 90mm, 120mm, 150mm, 180mm) suitable for free arm frames of Toyota & Tajima machines. Screw is adjustable by hand or screwdriver. Attention! Please look precisely at the damaged screw to order the right one!
Suitable for Toyota ESP 9000, ESP 9100 as well as for Expert ESP 9100. How to exchange the fabric presser, you can see here:
Needle Clamp Toyota ESP Expert Embroidery machines The tiny hole at the needle holder serves as thread guide. Instruction for exchanging the needle holder: the exchange of the needle holder on the machine is easy. - Loosen the screw and remove the needle - then unscrew and remove the screw completely, the needle holder can easily be pulled down. - put on the new needle holder, tighten screw a little bit - insert the needle and than tighten down the screw completely - ready How to exchange the needle holder, you can see here:
Elastic plastic-guidance with two ball-shaped endings and a little groove for the jamming of the yarn. Herewith you can easily thread the upper thread through the spiral coiled tube of the yarn-guidance.Compatible with all Toyota/Expert/Ricoma/Embrix QH-C embroidery machines (excluding Embrix Pro/ProXL/Dual/Quad)
brass frame screw for all big square shaped free arm frames. Suitable for free arm frames of Toyota & Tajima machines. Screw is adjustable by hand and screwdriver. Is only delivered in set. Included in the scope of delivery: 1x screw, 1x circlip, 1x brass inset, 1x brass inset with female screw thread Attention! Please look precisely at the damaged screw to order the right one!
Herewith you can fix the standard 5000m cones on the machine, so that the thread can't get entangled. If smaller cones for example 1000m are put on the yarn fixation can easily be removed by pulling it upwards and so even small cones are fixed.
Thread cutter knife for bobbin thread (the complete set consists of 4 pieces). Knife don't have to be adjusted - only screw in, ready.Only for Toyota embroidery machines
Original spare part for TOYOTA AD 850, AD 851, AD 860
Is fixed on the cap frame and is used for the fixation of the cap on the cap frame. Suitable for the cap driver of the ESP 438.
Herewith you can additionally fix the caps on the cap frame. Suitable for the cap driver of ESP 438/ESP437
Rotary Hook for Expert/Toyota - embroidery machines 9100 and 9000This eccentric hook ensures that your embroidery machine runs even more smoothly.
Needle bar driver (Reciprocator) for Toyota ESP 9000, ESP 9100 and for Expert ESP 9100 embroidery machines.
german printed Users Manual for TOYOTA embroidery machine AD 850, 36 pages
Potentiometer for Toyota/ESP/Expert embroidery machines. Please note: Due to differences in connector types, you must reuse your existing cable and solder it to the new potentiometer. This ensures that the potentiometer is 100% compatible with your machine.
german printed Users Manual for TOYOTA embroidery machine ESP9000, 109 pages
Advantages of the laser-pointer: - especially suitable for embroidery machine newcomers, fewer crashs because of trace mistakes - easy positioning of the embroidery startpoint Attention: Only for ESP9100 applicable! Included in the scope of delivery: - laser with cable - cap deflector shield - 2 distance holder with female screw thread and 4 suitable screws - metal holder - for fixation on the machine - iron sheet hook with hexagon socket screw and flat washer for fixation of the laser on the metal holder - Connection-cable with access piece "CN13" for connection with the machine
FOR EXCHANGE. Here we need the defective electronic component. We will repair the circuit board, test it extensively and send the repaired component back to you. You can get spare parts for the TOYOTA embroidery machine from us. Much parts are on stock, other parts can be ordered or repaired. Please ask for the articles which are not in our online shop by e-mail. We only need the spare part number from the parts catalog. Then we can quickly give you an information.
englisch printed Users Manual for TOYOTA embroidery machine AD 850, 74 pages
Printed Parts Catalogue for TOYOTA ESP 9000, 55 Seiten
Printed Parts Catalogue for TOYOTA AD860, 35 Seiten
Printed Parts Catalogue for TOYOTA AD850, 32 Seiten
You can get spare parts for the TOYOTA embroidery machine from us. Much parts are on stock, other parts can be ordered or repaired. Please ask for the articles which are not in our online shop by e-mail. We only need the spare part number from the parts catalog. Then we can quickly give you an information.
E-Thread Take-Up Cam 2161902-241 Original TOYOTA part You can get spare parts for the TOYOTA embroidery machine from us. Much parts are on stock, other parts can be ordered or repaired. Please ask for the articles which are not in our online shop by e-mail. We only need the spare part number from the parts catalog. Then we can quickly give you an information.
E-Needle Change Motor 2161908-723 Original TOYOTA part You can get spare parts for the TOYOTA embroidery machine from us. Much parts are on stock, other parts can be ordered or repaired. Please ask for the articles which are not in our online shop by e-mail. We only need the spare part number from the parts catalog. Then we can quickly give you an information.