Multifunction Hoops

Multifuncion frame.. 8 different cut-out iron sheets with different sizes. The sheets can be easily switched with only one screw in a matter of seconds. Excellent suitable for materials which can not be fixed in normal embroidery frames, because of their size or stiffnes, for example pockets, collars, trouser legs, tubular fabric and many more. Compatible with following machines: Toyota Expert ESP 9000/9100 Toyota AD 860/850/830/820 RiCOMA Industry machines (the Flat-8 is now also available for the Ricoma EM-1010: Link)Embrix Tajima Feiya SWFHappy => On condition that the width of the machine fixture is ca. 355-360mm. This is the standard measure of the machines above. The 8 cut-out iron sheets have following inside dimensions (W x H): 50 x 155 mm 63 x 155 mm 75 x 155 mm 115 x 155 mm 165 x 150 mm 200 x 80 mm 100 x 320 mm The half-round cut-out has a diameter of 82 mm

Multifuncion frame.. 8 different cut-out iron sheets with different sizes. The sheets can be easily switched with only one screw in a matter of seconds. Excellent suitable for materials which can not be fixed in normal embroidery frames, because of their size or stiffnes, for example pockets, collars, trouser legs, tubular fabric and many more. Compatible machines: RiCOMA EM-1010 Brother PR 655 Brother PR 670E Brother PR 1000 Brother PR 1000E Brother PR 1050X Brother PR 1055 The 8 cut-out iron sheets have following inside dimensions (W x H): 60 x 120 mm 73 x 120 mm 85 x 120 mm 83 x 150 mm 133 x 116 mm 179 x 140 mm 119 x 194 mm The semicircular cutout is 150mm at the widest point and 140mm at the highest. The adhesive frame for the EM-1010 works just like the regular Flat-8 adhesive frame, which is suitable for several different machine models.

Special embroidery frame for all materials that need to be clamped, e.g. shoes, saddle pads, doormats, bags, hats. The Robot-Frame is quick and easy to assemble and very sturdy.The brackets can be adjusted to a maximum width of 205 mm (internal dimension). The retaining brackets are rubberized on the top to prevent damage to the clamped material. The retaining brackets have a depth of 150mm, the contact surface is 90mm.Suitable for Toyota, RiCOMA, Tajima (single-head) embroidery machines.The Robot Frame 2 works in the same way as the previous Robot Man. You will find a video about this a little further down

FAST MAGNA FRAME - the revolutionary way to embroider difficult-to-clamp textiles quickly, easily and precisely. The ideal complement for your embroidery machine. It can be used to embroider areas on textiles that were previously impossible - e.g. baby socks, gloves, potholders, finished wallets, shirt sleeves, jeans and more - and all without unraveling them. FAST MAGNA FRAME can be used with the magnetic clamps or alternatively with Filmoplast as well as the Flat-8 frames. Combine two perfect possibilities in one frame system. The advantages at a look: - Pocket embroidery fast & easy, without undoing the bag - Decoration of trouser legs over the whole length without opening a seam - Personalize gloves with perfect precision - Embroider shirt sleeves, trouser legs, gloves, socks, boots, potholders, golf club bags, cloth bags, children's clothing and much more The formats of the frames are (inner dimensions rounded in cm): 17.5 cm x 12.5 cm 15 cm x 20 cm 10 cm x 28 cm 5 cm x 10 cm 7,5 cm x 10 cm 2,5 cm x 15 cm The semicircular hoop has a radius of 15 cm

Used: Multifuncion frame.. 8 different cut-out iron sheets with different sizes. The sheets can be easily switched with only one screw in a matter of seconds. Excellent suitable for materials which can not be fixed in normal embroidery frames, because of their size or stiffnes, for example pockets, collars, trouser legs, tubular fabric and many more. Compatible with following machines: Toyota Expert ESP 9000/9100 Toyota AD 860/850/830/820 RiCOMA Industry MachinesEmbrixFuwei FW-1501 Tajima => On condition that the width of the machine fixture is ca. 355-360mm. This is the standard measure of the machines above. The 8 cut-out iron sheets have following inside dimensions (W x H): 50 x 155 mm 63 x 155 mm 75 x 155 mm 115 x 155 mm 165 x 150 mm 200 x 80 mm 100 x 320 mm The half-round cut-out has a diameter of 82 mm

Embroidery frame for all materials which have to be clamped, for example: shoes, caparisons, car mats, etc. The Robot Frame can be easily and quickly installed, is made in a stabil way and the width is adjustible from 3,5 - 17,5cm (inside measure). The holder is gummed and on the companion piece is a groove / noth for an optimal hold of the clamped material.