Embroidery Materials

Spray adhesive for fixing nonwovens to textiles Spray aerosol: 500ml Properties: suitable for fixing the fabric during embroidery and cutting Time adhesive, strong adhesive effect within the first 15 minutes Adhesive effect disappears almost completely after 24 hours Fast adhesion Repositionable adhesive Leaves neither marks nor stains Reduces thread breakage Increases the embroidery quality as the fabric is fixed even better Colourless powder Suitable for all fabrics Almost odourless Also ideal for inserting zips and finishing hems Replaces cumbersome iron-on stabiliser CFC free Processing: Shake can briefly Hold bottle as upright as possible Spray at a distance of approx. 20 - 25 cm Always spray onto the fleece NEVER onto the textile

Our proven thermal film BSF (iron-on embroidery film) "FusyFilm" Thermal Foil to make patches ironable on textiles Mounting with electric iron or hot press to the back of embroidered badges. The durability according to the manufacturer is up to 60 degrees. Price per running metre, width: 49cm. Processing instructions: 1. Embroider patches, preferably on SUMa or SUMa-Soft embroidery backing. 2. 2. remove the patch from the embroidery hoop and turn it inside out. 3. preheat the iron or transfer press. Press the thermal foil with the protective paper facing upwards (so that it does not stick to the heating plate) at approx. 130 - 150 degrees Celsius for three to five seconds. 4. peel off the protective paper. 5. Apply a second layer of thermal foil (see point 3); the first layer is absorbed well by the embroidery base, the second layer then adheres very well to the textile. 6. peel off the protective paper. 7. cut out the patch with scissors. 8. iron the patch onto the desired area from the front for approx. 3 seconds using an iron or transfer press. 9. turn the textile onto the reverse side and press from the back for approx. 15 - 20 seconds at approx. 130 - 150 degrees Celsius (ATTENTION: The contact pressure must not be too high, otherwise the patch will become saturated with the adhesive layer and will not adhere to the textile). This causes the adhesive to melt into the fabric and adhere perfectly. Roll 100 m x 49 cm. Apply with an iron or hot press to the back of embroidered patches. Durable up to 60 degrees according to manufacturer's instructions, wash-resistant. Note: The above information is for guidance only. The final result will vary depending on the fabric and working conditions. Preliminary tests on loose fabric recommended.

The colors Black, Swiss Red, and Bugatty Royal are currently unavailable. Comfortable soft substrate material for emblems in 10 different colours Upper material 65% polyester, 35% cotton, with fleece of 100% polyester, 325g/qm Role width 80cm Features: washable up to 90 degrees, resistant to cleaning twill fabric with durable coating and fleece very tensile and yet extremely soft excellent abrasion resistance excellent technical values for shrinkage and pilling best color behavior due to dispersion and twill dyeing high durability industrial washability also suitable for workwear and professional clothing no gluing or fixing of fleece material necessary without azo dyes Oeko-Tex Standard 100 other colors available on request Minimum purchasing 3m We offer reduced prices from 5m, from 10m, from 25m. Please enter the desired number of meters, the graduated prices will be displayed accordingly.

hook-and-loop - width 10cm, can be ordered per running metre - optionally hooked or fleecy side - in black or white- ÖKO-Tex

Embroidery needles for Tajima, Toyota/Expert and RiCOMA embroidery machines; System DB x K5; one package contains 10 pieces   Available with 3 different needle points:   Tip shape:                                             Application area: slightly rounded tip (=RG)                       knitwear (z.B. knitted garments, jersey) and                                                                  textile (z.B. business shirts, jeans, frottee, silk, microfiber) sharp tip (=R)                                          leather, synthetic leather, patent leather (reduce the stitch density) slight ball tip (=FFG)                           textile (coated, fortified material) 

CCS-SUMA - the perfect embroidery backing material for patches (embroidered badges). Roll size: approx. 4.5m x 55cm (embroidery area approx. 4.3m x 50cm) Characteristics outer material made from fine polyester fabric stable stiff linen laminated on the back high stability requires fewer underlay stitches in the embroidery programme and therefore reduces the running time 100% polyester perfect for border hoops and all standard embroidery hoops 25 different colours available light colours washable up to 95 degrees, dark colours up to 60 degrees (do not use bleach / fabric softener) also suitable for filigree and small lettering perfect base material for motorbike patches patches for work clothing the material can also be provided with a hot-melt adhesive coating (BSF film) or Velcro tape very precise positioning of the stitches for the highest quality Minimal material distortion no preparatory work required for cutting and ironing on the fleece

Embroidery needles for Tajima, Toyota/Expert and Toyota embroidery machines; System DB x K5; one package contains 10 pieces These needles have a special titanium nitride coating, which is extremely hard and offers the needles a high level of protection against wear and damage. They are particularly suitable for embroidery on leather with tight embroidery or for 3D embroidery.  Available with 3 different needle points:   Tip shape:                                             Application area: slightly rounded tip (=RG)                       knitwear (z.B. knitted garments, jersey) and                                                                  textile (z.B. business shirts, jeans, frottee, silk, microfiber) sharp tip (=R)                                          leather, synthetic leather, patent leather (reduce the stitch density) slight ball tip (=FFG)                           textile (coated, fortified material) 

Degreasing- and Cleaningspray (Pulimak): Stain-remover-spray with extremly degreasing powder and solvents. It forms a white powder and removes grease, oil, sauce, ink and lip stick from clothes, fabric and fabric covers. Processing: Spray Pulimak on the contaminated area. Let absorb until the Pulimak-Spray is completely dried. Afterwards remove the white powder with a brush or compressed air.  

Spray oil: Highly effective precision mechanics oil Spray bottle: 400ml Properties: Absolutely resin and acid-free leaves no residues or edges in the embroidery material Extremely creeping and economical dissolves rusted parts, reliably protects against rust Long-lasting lubricating effect for reduced wear odourless, fully synthetic reduces the noise level of the embroidery machine fewer thread breakages due to perfectly oiled mechanical components increases the service life of the mechanics the spray tube can be used to lubricate exactly the desired area also for lubricating roller doors, cylinder locks and for car care

Spray adhesive extra strong for fixing nonwovens to textiles Spray aerosol: 500ml TAKTER® 800 is an adhesive spray that has been specially equipped with the SPRAY CONTROL system so that it can be used in the vicinity of embroidery machines. The special spray head enables well-controlled atomization and the adhesive strength decreases significantly after a few hours. Properties: suitable for fixing the fabric during embroidery and cutting for temporary bonds it disappears after few hours. it is a Dry Powder Adhesive it neither transfers nor dirties the fabrics and cloths it allows many applications suitable for light fabrics: silk, cotton, non-woven fabric CFC free Processing: Shake can briefly Hold bottle as upright as possible Spray at a distance of approx. 20 - 25 cm Always spray onto the fleece NEVER onto the textile

Thread Scissors with Clip-System 10,5cm, straight cutting length 2,5cm very slim shape excellent to cut off small threads detailly or to cut threads between parts of the embroidery handling with one hand metal handle ideal for allergy sufferers, too  

Now new in the improved 2nd generation with larger battery and even faster and more powerful motor and longer runtime The Stitch Eraser 2nd generation is ideal for unstitching all kinds of embroideries and removes stitches comfortably and without damaging the base material. Designed by stickers for stickers. For example, the blades are specifically designed for unpicking stitches and cannot be compared to a regular electric razor or hair clipper. Don't bother, remove stitches like never before. Technical data: * ergonomic and lightweight construction (only 200g) for comfortable cordless handling * 2 selectable speeds: 7000rpm for wide and woven embroideries and 4000rpm for narrow embroideries * easily replaceable blade (compatible with the blades of the previous generation) * integrated rechargeable lithium battery (2000mAh) for significantly longer operating time (up to 7 hours) * Charge with the included Micro-USB cable at every available USB port (e.g. on computer, USB cell phone chargers, etc.) * Overcharging and overheating protection for safe charging * Blade with tungsten steel coating on nano ceramic shear blade (10mm, removable) Scope of delivery: 1 x Stitch Eraser 1 x Micro-USB charging cable 1 x cleaning brush 1 x operating instructions Of course you can also get replacement blades from us.

Highly effective fast chastener spray used for clearance of adhesive arrearages, oily and fatty residuals on metallic areas, volatilizes without leaving brinks. Also suitable for clearance colour arrearages.

This color chart contains yarn-samples of 391 Isacord- and 22 Multicolor-colors from the company Amann, as well as a table of yarns, arranged according to the color-number, so that you can find it faster, and additional information about yarn-quality and areas of application for the yarn. Herewith you can see the colors, in the way they really look, contrary to photographed colors. Here you can download the color chart free of charge: (Please note that, we can't guarantee for color accuracy here) To the color overview Do you need other Amann products which are not to be found in our OnlineShop such as Saba, Onyx, N-Tech or Rasant? We will be happy to order them for you at attractive prices within a very short time. Please send us a mail with your wishes to: info@stickereibedarf.de

THE NEEDLE NOSE TWEEZERS Features: Special tweezers with built-in notches for ideal gripping of the embroidery needles easier replacement of needles in the embroidery machine easy straight alignment of the needles possible Time saving due to more convenient handling   How easy the handling of the needle becomes with this tweezer, you can see here:

This tweezer is ideal suitable for working with threads because of it's narrow and lightly curved tip. Also for threading and pulling through the thread in thread tension and thread sensor an advantage.

EVA-foam for 3D-effects - hard material for caps and emblems - soft material for outerwear - sold in sheets of ca. 40x30cm, price per 10 sheets - 1 VPE contains 10 sheets Oeko-Tex Standard 100 certified

Embroidery Scissors, 9cm total length, straight cutting length 2cm short slim tip for precise cutting excellent to remove threads the handles are covered with synthetic ideal for allergy sufferers, too  

Full synthetic multi area grease for embroidery machines This multi temperature area grease has remarkable wear protection and anticorrosive coating. It is a Rivolta product: characteristics: - long lubricant service life - very good media resistance - high pressure absorption capability - excellent anticorrosive coating - high temperature ready to use: - 45 degrees up to + 170 degrees Therewith the worm screws and the plain bearings can remarkably be serviced. The container has a practical pumping function to prise out the machine grease. content: 180 g

Embroidery Scissors, 10cm total length, curved cutting length 3cm short slim tip for extra fine textile work extra lightweight scissors to trim embroideries

Upper thread scale for perfect embroidery results (value required for Ricoma and Expert embroidery machines 100 - 140g) Precision spring balance, simple and gram-accurate adjustment of the upper thread tension. The components: are corrosion-free, including storage case and thread clamp. Measuring range: up to 300 g Scale graduation: 2 g Precision: + / - 0.3 % Scale length: 100mmAdvantages of using thread balances: - The correct ratio of upper thread tension to lower thread tension has a decisive influence on a good embroidery result. - The two thread balances enable a gram-precise setting - especially when using different thread types and thicknesses. - Correctly set thread tension prevents both the formation of loops and excessive tightening of the embroidery. - Fewer faults and thread breakages during embroidery.

The rechargeable electric fabric scissors for home and industrial use. The perfect addition to any embroidery studio. Application areas for cutting: - All nonwovens, the base materials SUMa and SUMaSoft and, of course, all fabrics of embroidery or sewing. - Carpet, leather, cardboard, curtain fabrics and so on. - it is not the hobby version with 1500mAh but the professional version with longer battery life (2500mAh) and greater cutting power. Features: - Voltage: 4VDC - Power: 20W - Battery: 2500mAh Lithium battery - Charging time: 3 hours when fully charged - Working time: up to 5 hours - Cutting capacity: 0-10mm (depending on the material) - Net weight of scissors: only 330 grams Features: - Ergonomic design - making cutting comfortable. - One-button start switch to get started immediately. - the 60° angle of the blade and the tungsten steel blade are sharp and efficient for both soft and hard materials - fast charging very easy per USB Cutting capacity - depending on the material quality: - Leather up to 6mm - PVC up to 3mm - linen fabric up to 8mm - cardboard up to 2mm - Felt up to 6mm - Clothing fabrics up to 6mm - Aluminum parts up to 0,4mm - Carpet up to 3,5mm Included in delivery: 1x electric scissors 1x tungsten steel blade 1x USB charging cable

indicated dimension in mN, for perfect embroidery results (needed value for Ricoma embroidery machine 200-230mN and for Toyota Expert embroidery machine 160 - 180mN)  

Weaver’s Scissors 10cm total length, straight cutting length 3cm fine tip for precise work slim cutting edge big handles for the fine cut

  On this color chart are the original sections of SUMa - a fabric that is very suitable for patches -. With this you can see the colors as they look in reality, different from photographs or print. On the reverse side there is additional information and processing instructions. The color card is supplied in a transparent folder for storing! (The stiff linen was removed before sticking to allow better adhesion to the paper).

Replacement blade for Electric Stitch Eraser Available blade widths: 10 mm or 40 mm Compatible with Stitch Eraser 2nd generation and 1st generation

Tailor’s Scissors, 24cm total length, straight cutting length 11cm for the perfect cut of all common fabrics and fleece precise cut perfect handling because of safe, comfortable handles ideal for allergy sufferers, too

Applique Scissors 13cm total length, angled cutting length 4cm ideal for appliqué work angled special blade shape protects the fabric and allows cutting directly at the seam rubberized handle for good grip

Silicone spray for embroidery: LUBRICANT: for embroidery threads, cutting blades, yarns, plastic parts, rubber parts, leather, sewing threads, hinges, locks, doors, curtains. INSTRUCTIONS OF USE Spray the products from 30 cm distance of the material to treat. Additional DESCRIPTION SILICONE EXTRA is a multipurpose silicone spray, used as: SLIDING: for paper, carton, fabrics, leather, plastic materials, rubber materials, worktops ANTIADHESIVE: for plastic moulds, rubber moulds, screen printing looms, polyethylene PROTECTIVE: it is a good water repellent and prevents oxidation. It is used in: embroidery, cutting rooms, serigraphy, typography, graphic industry, plastic and rubber industry, household, shoes industry, upholstery industry, garments manufacturing, paper industry. Good mould releasing agent for plastic and rubber. Good antistatic It neither grease nor stains treated materials. It leaves a very fine film that protect against oxidation.

This color chart contains yarn-samples of 100 Serafilyarn-colors from the company Amann, as well as a table of yarns, arranged according to the color-number, so that you can find it faster, and additional productinformation. Herewith you can see the colors, in the way they really look, contrary to photographed colors. Delivery against a nominal charge of 9,90 € plus VAT. Do you need other Amann products which are not to be found in our OnlineShop such as Saba, Onyx, N-Tech or Rasant? We will be happy to order them for you at attractive prices within a very short time. Please send us a mail with your wishes to: info@stickereibedarf.de

The ideal addition for your embroidery The innovative stabilizer roll holder, the useful tool for any embroidery. The size is matched to the roll width of our ripping and cutting stabilizers up to 40 cm wide. Advantages: all stabilizers with a width of 22 cm or 38 cm fit into the stabilizer roll holder also suitable for Hydrolon in 33cm width Faster cutting/tearing from the roll significantly more order and space in the embroidery several stabilizer roll holders allow different stabilizers to be quickly available prevents nonwovens lying around and tripping hazards easy to fill the stabilizer holders Labeling optionFeatures: Sturdy metal design, stove-enameled, for long durability. Automatic tear-off strip for easy tearing of tear-off fleeces. Secure fixation. Suitable for fleece rolls up to a maximum width of 41 cm and a diameter of 40 cm. Metal frame Ø: 18 mm for stability and robustness. Compact dimensions WxDxH: 51x22x36 cm, space-saving and flexible assembly. Weight: 2 kg for easy assembly and yet high stability Simple wall mounting Supplied without fleece

This color chart contains yarn-samples of 41 Isamet yarn-colors from the company Amann, as well as a table of yarns, arranged according to the color-number, so that you can find it faster, and additional product information. Herewith you can see the colors, in the way they really look, contrary to photographed colors. Delivery against a nominal charge of 9,90 € plus VAT. Do you need other Amann products which are not to be found in our OnlineShop such as Saba, Onyx, N-Tech or Rasant? We will be happy to order them for you at attractive prices within a very short time. Please send us a mail with your wishes to: info@stickereibedarf.de

Thread Scissors, 9cm total length, curved cutting length 2cm short slim tip for precise cutting excellent to trim embroideries because of the curved shape the handles are covered with synthetic ideal for allergy sufferers, too

Replacement blade for the PowerSchneider Can be replaced easily

Thread- / Rubber Scissors 13cm total length, curved cutting length 4,5cm excellent for thread cutting or to trim embroideries slim shape pointed tip for precise cut rubberized handle for better grip ideal for allergy sufferers, too

The professional bobbin winder - save the cost of expensive prewound bobbins. The bobbin thread bobbin winder in industrial quality makes this quite simply possible. Quality characteristics: Industry Quality Length of the winding process is measured via optical sensor quantity of winding individually adjustable automatic stop even, smooth winding process for good embroidery results applicable for different bobbin sizes and bobbins Voltage adjustment individually possible the "pin" for attaching the coil has a diameter of approx. 6mm The diameter of the "pin" can be changed by the integrated spring CE Certificate

Embroidery Scissors, 13 cm total length, straight cutting length 4,5cm for all embroidery and sewing works stable and reliable comfortable and safe working because of soft and non-slip handles ideal for allergy sufferers, too

Sew- and All-Purpose Scissors, 20cm total length, gerade cutting length 9,5cm powerful cut by long-eye handles

Textile color fan - includes our 9 standard colors - color fan in the colors of our sumasoft - original stuff - comfortable variety of the pattern of cloth by clear circle retainer - includes this colors: black, white, swiss red, sunshine, pale grey, irish green, marine, bugatti royal, lava.  

Tailor’s Scissors, 20 cm total length, straight cutting length 8,5cm for the perfect cut of all fabrics and fleece precise cut perfect handling because of safe, comfortable handles

USB charger suitable for PowerSchneider and StitchEraser 2G.  Features: - USB output (socket A = standard USB plug) - 10W power - Output: 5V, 2000mAh - Input: 100V - 240V - Dimensions: 85x34x23mm 

Oak leaf to iron on Price per set with one piece for the left side and one piece for the right side colors: gold or silver Instructions: 1. Place the oak leaves as desired on the textile or cap 2. Overlay it with a linen cloth 3. press the iron or ironing press on the desired position for about 3 seconds at level 3 4. Allow to cool

Weaver’s Scissors 13cm total length, curved cutting length 4cm pointed tip for pinpoint working slim shape big handles for the fine cut

Weaver’s Scissors 10cm total length, curved cutting length 3cm pointed tip for pinpoint working slim shape big handles for the fine cut

Wilcom DecoLite e4 offers the most important tools for creating and editing designs for your embroidery machine. With simple graphical digitizing tools, complete control of font and stitch settings, and over 45 high-quality embroidery fonts, you can quickly and easily produce your own professional-quality embroidery designs. With CorelDRAW® Graphics Suite Special Edition X8, DecoLite e4 offers a range of powerful graphics tools that provide a solid foundation for converting graphics into embroidery files. With easy-to-use lettering, monogramming and punching tools, Wilcom DecoLite e4 is a cost-effective way to get started in your embroidery business. Here you can find the FLYER from Wilcom DecoLite e4  Overview of functions: NEW: now with 45 high-quality embroidery fonts Base lines for fonts: Straight, top and bottom arc Display option: TrueView, stitches, contours, connecting stitches, needle points, functions, ruler and grid lines, embroidery frame manual & automatic delay compensation depending on the project Automatic underlay stitches depending on the project Individually adjustable thread cutting settings Incl. CorelDRAW® Graphics Suite Special Edition X8 Features NEW: Tools for manual punching "Digitize open form", "Digitize closed form", "Digitized column". Convert created contours into contour stitches, satin stitches or lockstitches Measuring tool Monogram tool Scaling, forming, stitch editing TrueType font conversion Zoom in/out of DST files with recalculation of stitches. Zoom function: Zoom box or mouse wheel Automatic conversion of vectors into embroidery NEW: Post-processing of converted embroidery files Direct pattern transfer to many industrial embroidery machine types Production worksheet, production details and colour film Satin stitch, Lockstitch, Zigzag Background fabrics adjustable Standard labelling Embroidery frame database, selection (91 industrial embroidery frames and 96 household embroidery frames are integrated) Changeover mm / inch Adjustable embroidery sequence for letters NEW: slow tracing by new stitch player in real view Small puncture filter Object properties dialog Embroidery density automatically adjusted to the embroidery width Inserting copied objects at special positions Creating screenshots of the embroidery as a preview Newly designed, clear and colorful user interface NEW: the photorealistic preview of the embroidery file can be exported with up to 600dpi. DecoLite e4 includes the following languages: German, English, French, Italian, Japanese, Portuguese, Spanish The following formats can be imported: EMB, ART, JAN, EMX, CND, GNC, INP, PCH, TAP, INB, EXP, KSM, TBF, DST, DSB, DSZ, 10O, EXP, ARX, PES, PEC, EMD, SEW, JEF, JEF+, HUS, SHV, VIP, VIP3, PCS, PCD, PCQ, PCM, CSD; XXX, STC, BRO, STX, DSN, PUM, PMU, ESD, T01, T03, T04, T05, T09, YNG, ART60, ART50, TYPE, ART42, AMT60, AMT50, AMT, JMT, EMT The following formats can be exported: EMB (versions e4, e3, e2), CND, TAP, INB; EXP, KSM, TBF, DST, DSB, DSZ, 10O, EXP, PES, PEC, EMD, SEW, JEF, HUS, SHV, VIP, VIP3, PCS, PCD, PCQ, PCM, CSD, XXX, BRO, STX, PUM, PMU, T01, T03, T04, T05, T09, YNG, EMT If you wish, we can show you an online presentation of the software!   If you are already using an older version of DecoStudio Lite, you can also update your program to the new version at a reduced price.   No guarantee for the functions of the software described by us.

Why? In times of rising recycling and purchasing costs for packaging materials, cardboard shredders offer new opportunities for cost savings.   Cost savings: ⁃ Reduction in the purchase of packaging materials ⁃ Less cardboard waste through recycling ⁃ Saves costs for the Lucid packaging licence for companies ⁃ Environmentally harmful films/plastics are avoided   Environment: The cardboard shredder protects the environment by reusing cardboard packaging. Damaged cardboard boxes that are no longer suitable for shipping and would otherwise have to be disposed of can be shredded and used as filling or packaging material. This saves resources and protects the environment. The CO2 footprint is also reduced.   Function: The precise cutting technique cuts the cardboard into honeycomb shapes, resulting in a cushioning packaging and filling material.   Advantages/properties: Compact table-top device weighing only 38 kg, therefore suitable for mobile use Carrying handles on the right and left make it easy to set up (one table is enough) or put away (if space is limited) Lateral blade for precise cutting of the cardboard to the desired width Cardboard thickness up to 8mm Cutting speed 3m/min Cutting width up to 425mm Energy-saving 400W Voltage: 220 - 240 V / 50 Hz Integrated reverse in the event of material jams Durable, extra-hardened cutting roller Cardboard with adhesive tape can also be processed Sturdy feet for non-slip standing CE certificate Emergency stop switch Automatic stop in case of overload Low-noise operation with only 55 decibels Dimensions: approx. 55 x 30 x 27 cm (WxHxD) The cutting waste is collected in a collection drawer

Wilcom Embroidery Studio DESIGNING 2026 - incl. CorelDraw 2025New features in EmbroideryStudio 2026: - “Snap to Object”: More precise point placement, as input points automatically snap to object edges, nodes, etc. - “Multi Blend”: New color gradient/blending workflow with multiple layers, presets, and the ability to mix colors and stitch types. - “Continue Digitizing”: Existing closed objects can be further digitized without having to restart. This results in fewer overlaps and a cleaner “Color Object List.” - The enhanced “Custom Accordion Spacing” feature allows for gradual transitions within a single accordion object. - “Redwork”: New redwork tool for single-line contour embroidery with optimized stitch order (single, triple, backstitch, stemstitch). - “Wilcom Answers” (AI assistant): Integrated help in the software that provides answers from the official Wilcom documentation as step-by-step instructions. Flexible license options - Digital license (without dongle): Simply download and get started right away. - Hardware license (with dongle): Ideal for use on different computers. - One-time purchase or subscription. The subscription includes all available elements, a total of 19 additional professional features, and you automatically receive new features via updates - Load your FREE TRIALAn overview of the functions of the Version 2026 can be found in the: PROSPECT

Wilcom Embroidery Studio DESIGNING Digital Edition 2026 - incl. CorelDraw 2025NEW in Version 2026- With the “Continue Digitizing” function, you can easily continue digitizing existing closed objects without having to start over. This reduces overlaps and gives you a cleaner color object list. NEW- “Snap to Object”: Input points automatically snap to edges, nodes, and objects for faster and more precise digitizing. NEW- “Separate Pull Compensation”: Control pull compensation independently for each side of an object – ideal for critical fabrics and sharp contours. NEW- “Streamline Production Export”: Design and production documents can be exported in one step – with predefined export and print profiles. NEW- Improved auto-digitizing and printable embroidery: improved auto-digitizing with color and object optimization, as well as the ability to export designs as high-resolution PNGs for textile printing. NEW- Download your FREE TRIALAn overview of the functions of the Digital Edition 2026 can be found in the: PROSEPKT

One-ring Sicssor, 11cm total length, curved cutting length 4cm to cut of threads pointed tip for agile, precise working