BobbinCase (holding device) in which the bobbin threads are inserted. Suitable for both self-wound bobbin threads and pre-wound bobbins.
The bobbin thread tension can be adjusted individually with the adjusting screw.
Highest quality "Made in Japan"
Suitable for TOYOTA / EXPERT and RiCOMA embroidery machines.
For self-winding of the lower thread. Reusable.
Compatible for all TOYOTA and TAJIMA embroidery machines.
z. B. ESP 9100, ESP 9000, AD 860, AD 850......
brass thumbscrew for all smaller, for example round free arm frames
(70mm, 90mm, 120mm, 150mm, 180mm) suitable for free arm frames of Toyota & Tajima machines. Screw is adjustable by hand or screwdriver.
Attention! Please look precisely at the damaged screw to order the right one!
Herewith you can fix the standard 5000m cones on the machine, so that the thread can't get entangled. If smaller cones for example 1000m are put on the yarn fixation can easily be removed by pulling it upwards and so even small cones are fixed.
Can be used for Toyota and RiCOMA machines.
Ricoma brass thumbscrew exclusively for Ricoma free arm frames in sizes90x90mm round120x120mm round150x150mm round290x290mm. Screw is adjustable by hand.
Attention! Please look precisely at the damaged screw to order the right one!
Needle Clamp Toyota ESP Expert Embroidery machines
The tiny hole at the needle holder serves as thread guide. Instruction for exchanging the needle holder: the exchange of the needle holder on the machine is easy. - Loosen the screw and remove the needle - then unscrew and remove the screw completely, the needle holder can easily be pulled down. - put on the new needle holder, tighten screw a little bit - insert the needle and than tighten down the screw completely - ready
How to exchange the needle holder, you can see here:
Cover for rotary hook, machine model up to approx. 2017, width of the cover approx. 55mm.
CAUTION: Newer machines (starting approx 2018) have the small lower arm and therefore narrower protective covers with a width of approx. 45mm. Please be sure to measure beforehand.
Elastic plastic-guidance with two ball-shaped endings and a little groove for the jamming of the yarn. Herewith you can easily thread the upper thread through the spiral coiled tube of the yarn-guidance.
brass frame screw for all big square shaped free arm frames. Suitable for free arm frames of Toyota & Tajima machines.
Screw is adjustable by hand and screwdriver.
Is only delivered in set. Included in the scope of delivery:
1x screw, 1x circlip, 1x brass inset, 1x brass inset with female screw thread
Attention! Please look precisely at the damaged screw to order the right one!
Ricoma brass thumbscrew especially for free arm frames in size 210 (round). Screw is adjustable by hand.
Attention! Please look precisely at the damaged screw to order the right one!
Herewith you can fix the standard 5000m cones on the machine, so that the thread can't get entangled. If smaller cones for example 1000m are put on the yarn fixation can easily be removed by pulling it upwards and so even small cones are fixed.
Cover for rotary hook, machine model starting approx. 2018, width of the cover approx. 45mm.
CAUTION: Older machines (up to approx 2017) have the bigger lower arm and therefore bigger rotary hook covers with a width of approx. 55mm. Please be sure to measure beforehand.
Thread cutter knife for bobbin thread (the complete set consists of 4 pieces). Knife don't have to be adjusted - only screw in, ready.Only for Toyota embroidery machines
Printed spare parts catalog for Ricoma 1501TC-7S and 8S
for machine with transverse panel 7S and vertical panel 8S
Parts Catalogue, 100 pages
with exploded views and detailed listing of spare parts
Reciprocator for Ricoma embroidery machines
When replacing the Reciprocator, you must pay attention to the color.
Please select the color of the reciprocator in your embroidery machine on the right. So that we send you the same color.
An overview of which elements are available for the Digital Edition Decorating and for the Digital Edition Designing can be found here: Downloads
Here you will find all available elements of the different versions and can thus expand your software:
There are six elements for the Digital Edition Decorating:
Team Names Advanced / Professionell *** VIDEO ***
OffsetsAdvanced / Umrandungen Professionell *** VIDEO1 *** *** VIDEO2 ***
Photo Flash / Color Photo Stitch
ReefPhoto Stitch
Single Sequins / Pailletten Standard *** VIDEO ***
Hand Stitch Effekt *** VIDEO ***
There are twelve elements for the Digital Edition Designing:
Spiral Fill / Spiralfüllungen NEU *** VIDEO ***
String / Paghadi Stitch // Schnurstich *** VIDEO ***
Advanced Motif Run / Motiv-Laufstich Professionell *** VIDEO ***
Maze Fill *** VIDEO ***
Custom Splits / Benutzerdefinierte Stichteilungen
Motifs / Motiv-Füllungen
Team Names Advanced / Professionell *** VIDEO ***
Alphabet Creator / Alphabete selbst erstellen *** VIDEO ***
Single Sequins / Pailletten Standard *** VIDEO ***
Sequins Advanced / Pailletten Professionell *** VIDEO1 *** *** VIDEO2 ***
Chenille
Schiffli
Wilcom Embroidery Studio DESIGNING 2026
- incl. CorelDraw 2025For more information, visit: www.sticksoftware.deWhen does the special trade-in price apply? This price applies only when you return existing embroidery software, such as Brother PE-Design, Stitch & Sew, Pulse, Chroma, and similar software (with a dongle or license code). Other software versions are available upon request. Please contact us to ensure they are compatible. New features in EmbroideryStudio 2026: - “Snap to Object”: More precise point placement, as input points automatically snap to object edges, nodes, etc. - “Multi Blend”: New color gradient/blending workflow with multiple layers, presets, and the ability to mix colors and stitch types. - “Continue Digitizing”: Existing closed objects can be further digitized without having to restart. This results in fewer overlaps and a cleaner “Color Object List.” - The enhanced “Custom Accordion Spacing” feature allows for gradual transitions within a single accordion object. - “Redwork”: New redwork tool for single-line contour embroidery with optimized stitch order (single, triple, backstitch, stemstitch). - “Wilcom Answers” (AI assistant): Integrated help in the software that provides answers from the official Wilcom documentation as step-by-step instructions. Flexible license options - Digital license (without dongle): Simply download and get started right away. - Hardware license (with dongle): Ideal for use on different computers. - One-time purchase or subscription. The subscription includes all available elements, a total of 19 additional professional features, and you automatically receive new features via updates - Load your FREE TRIALAn overview of the functions of the Version 2026 can be found in the: PROSPECT
Advantages of the laser-pointer:
- especially suitable for embroidery machine newcomers, fewer crashs because of trace mistakes
- easy positioning of the embroidery startpoint
Attention: Only for ESP9100 applicable!
Included in the scope of delivery:
- laser with cable
- cap deflector shield
- 2 distance holder with female screw thread and 4 suitable screws
- metal holder - for fixation on the machine
- iron sheet hook with hexagon socket screw and flat washer for fixation of the laser on the metal holder
- Connection-cable with access piece "CN13" for connection with the machine
FOR EXCHANGE.
Here we need the defective electronic component. We will repair the circuit board, test it extensively and send the repaired component back to you.
You can get spare parts for the TOYOTA embroidery machine from us. Much parts are on stock, other parts can be ordered or repaired. Please ask for the articles which are not in our online shop by e-mail. We only need the spare part number from the parts catalog. Then we can quickly give you an information.
The Ricoma Embroidery Machine RCM-1501TC-7S offers the optional opportunity to enlarge the embroidery area up to 1200 x 350 mm.
It's the perfect solution for oversized items such as flags, table runners, drapery, blankets, banners, and large pre-assembled pieces.
Scope of delivery:
- big border frame (inside dimension = 1200 x 350mm)
- big table top
- big X-axis drive complete incl. motor, belt drive and storage
- table-widening at the sides for a perfect repository of the embroidery textile
(Note: No machine included, it's only an additional option)
The conversion from the standard embroidery field to X-Panto is very easy, so that it can be done within a few minutes.
freight costs upon request!
Table top for Ricoma EM-1010 for embroidery on large, bulky textiles.
Angle brackets are supplied. The screws for mounting are located on the embroidery machine.
Very easy assembly within 5 minutes.
You can get spare parts for the TOYOTA embroidery machine from us. Much parts are on stock, other parts can be ordered or repaired. Please ask for the articles which are not in our online shop by e-mail. We only need the spare part number from the parts catalog. Then we can quickly give you an information.
E-Thread Take-Up Cam 2161902-241 Original TOYOTA part
You can get spare parts for the TOYOTA embroidery machine from us. Much parts are on stock, other parts can be ordered or repaired. Please ask for the articles which are not in our online shop by e-mail. We only need the spare part number from the parts catalog. Then we can quickly give you an information.
E-Needle Change Motor 2161908-723 Original TOYOTA part
You can get spare parts for the TOYOTA embroidery machine from us. Much parts are on stock, other parts can be ordered or repaired. Please ask for the articles which are not in our online shop by e-mail. We only need the spare part number from the parts catalog. Then we can quickly give you an information.
Wilcom Embroidery Studio DESIGNING Digital Edition 2026
- incl. CorelDraw 2025For more information, visit: www.sticksoftware.deWhen does the special trade-in price apply? This price applies only when you return existing embroidery software, such as Brother PE-Design, Stitch & Sew, Pulse, Chroma, and similar software (with a dongle or license code). Other software versions are available upon request. Please contact us to ensure they are compatible. NEW in Version 2026- With the “Continue Digitizing” function, you can easily continue digitizing existing closed objects without having to start over. This reduces overlaps and gives you a cleaner color object list. NEW- “Snap to Object”: Input points automatically snap to edges, nodes, and objects for faster and more precise digitizing. NEW- “Separate Pull Compensation”: Control pull compensation independently for each side of an object – ideal for critical fabrics and sharp contours. NEW- “Streamline Production Export”: Design and production documents can be exported in one step – with predefined export and print profiles. NEW- Improved auto-digitizing and printable embroidery: improved auto-digitizing with color and object optimization, as well as the ability to export designs as high-resolution PNGs for textile printing. NEW- Download your FREE TRIALAn overview of the functions of the Digital Edition 2026 can be found in the: PROSEPKT
EmbroideryStudio 2026 ESSENTIALS provides the basic tools for creating and editing embroidery designs. It supports multiple color palettes and offers a simple graphical digitizing approach. Based on Wilcom’s renowned stitch processing technology, it enables the quick and easy creation of commercial-quality embroidery designs. For more informationen visit: www.sticksoftware.deClick here for the FLYER
Overview of functions: 45 high-quality embroidery fonts Four font baselines: Fixed, Free, Clockwise, and Counterclockwise Display options: TrueView, Stitches, Outlines, Connecting Stitches, Needle Points, Functions, Rulers and Grid LinesEmbroidery Frame
Manual & automatic distortion correction depending on the project Automatic backing stitches depending on the project Thread cutting settings individually adjustable Tools for manual punching: “Digitize Open Shape,” “Digitize Closed Shape,” “Digitized Column” Measuring tool NEW: View and export high-resolution embroidery designs as virtual decorations for a realistic printed embroidery effect. Monogram tool Scaling, reshaping, stitch editing NEW: Outlines/borders now also available with satin stitch TrueType font conversion
Enlarge/reduce DST files with recalculation of stitches Zoom function: Zoom box or mouse wheel NEW: Post-processing of converted embroidery files NEW: Instant Smart Design function that quickly converts graphics into embroidery designs. Save in over 30 embroidery machine file formats Approval forms with barcodes, production worksheets, and summaries for efficient production NEW: Open and edit EMB embroidery files with an improved on-screen display of machine functions Use the Export Docker to view export status and history Satin stitch, running stitch, zigzag Tools for importing graphics and scaling graphics are available. Standard labeling
Extensive embroidery hoop database NEW: Support for magnetic hoops—add your own hoops individually Switch between mm and inch Adjustable embroidery order for letters NEW: Slow tracing with the new stitch player in real view Small stitch filter Object properties dialog Stitch density automatically adjusted to the embroidery width
Inserting copied objects at specific positions Creating screenshots of the embroidery as a preview
The following formats can be imported:EMB, FDR-3, CSE, TAP, INB, EXP, KSM, EBD, TBF, DST, DSB, DSZ, 10O, ZSK, CND, GNC, INP, BRO, STX, DSN, PUM, PMU, ESD, T01, T03, T04, T05, T09, YNG, EMX, JAN, JEF, JEF+, JPX, SEW, EMD, ART, EXP, ARX, ATR90, ART80, ART70, ART60, ART50, ART42, ART, PES, PEC, VP3, VIP, SHV, HUS, PCS, PCD, PCQ, PCM, XXX, CSD, EMT, AMT, JMT
The following formats can be exported:
EMB, FDR-3, U, CSE, TAP, INB; EXP, KSM, EBD, TBF, DST, DSB, DSZ, 10O, Z,
CND, BRO, STX, PUM, PMU, T01, T03, T04, T05, T09, YNG, JEF, SEW, EMD,
EXP, PES, PEC, VIP, VIP3, SHV, HUS, PCS, PCD, PCQ, PCM, XXX, CSD, YNG
If you wish, we can show you an online presentation of the software!
No guarantee for the functions of the software described by us.
€1,069.81*
This website uses cookies to ensure the best experience possible. More information...
